Machinery & Installtion

 

Name of the Trade :- Trade 1 ELECTRICIAN

No. of units in 1st shift :  03                                      in 2nd shift : 03                                                          in 3rd shift : Nil TOTAL UNITS :- 06
1. Name of the General Machinery and installation Number required for one unit as per NCVT

norms/

syllabus

 Total Number of equipment required for the total units

affiliated

 Total Number actually available or  all the units Indicate shortage if any
1 2 3 4 5 6
1 Rule wooden 4 fold 60 mm. 16 06 126 Nil
2 Plier insulated 150mm. 16 06 126 Nil
3 Plier side cutting 150 mm 16 06 126 Nil
4 Screw Driver 100mm. 16 06 126 Nil
5 Screw Driver 150mm. 16 06 126 Nil
6 Electrician connector, screw- driver 100mm.
insulated handle thin stem.		 16 06 126 Nil
7 Heavy duty screw driver 200mm. 16 06 126 Nil
8 Electrician driver 250mm thin stem insulated handle 16 06 126 Nil
9 Punch centre 150 mm x 9 mm. 16 06 126 Nil
10 Knife double bladed Electrician. 16 06 126 Nil
11 Neon Tester 16 06 126 Nil
12 Rule steel 300mm. 16 06 126 Nil
13 Saw tennon 250mm. 16 06 126 Nil
14 Hammer, cross peen 115 grams with handle 16 06 126 Nil
15 Hammer ball peen 0.75 kg. with handle. 16 06 126 Nil
16 Firmer chisel wood 12mm. 16 06 126 Nil
17 Gimlet 6mm. 16 06 126 Nil
18 Bradawl 16 06 126 Nil
19 Scriber 150 mm x Æ 4mm (Knurled centre position) 16 06 126 Nil
20 Pincer 150mm. 16 06 126 Nil
1 C. Clamps 200mm, 150mm, 100mm. 02 each 06 06 each Nil
2 Spanner 150mm adjustable 15 degree. 02 06 06 Nil
3 Blow lamp 0.5 liter. 02 06 06 Nil
4 Melting pot 01 06 03 Nil
5 Ladle 02 06 06 Nil
6 Chisel cold flat 25mm x 200mm. 02 06 06 Nil
7 Chisel wood firmer 25mm & 6 mm. 04 06 12 Nil
8 Drill machine hand 0 to 6mm capacity. 01 06 03 Nil
9 Electric drill machine portable 6mm capacity. 01 06 03 Nil
10 Pillar Electric drill machine 12mm capacity. 01 06 03 Nil
11 Allen key. 01set. 06 03set. Nil
12 Oil can 0.12 liter. 02 06 06 Nil
13 Grease gun 01 06 03 Nil
14 Out side micrometer 0 to 25 mm. 01 06 03 Nil
15 Bench Grinder motorized 01 06 03 Nil
16 Rawal plug tool and bit 02 set 06 06 set Nil
17 Pulley Puller 01 06 03 Nil
18 Bearing Puller 01 06 03 Nil
19 Hygrometer 02 sets 06 06 sets Nil
20 Techno-meter 0 to 100 deg. centigrade. 01 06 03 Nil
21 Scissors blade 150mm. 04 06 12 Nil
22 Crimping tool 01 set 06 03 sets Nil
23 Wire stripper 20 cm 01 06 03 Nil
24 Chisel cold flat 12mm 04 06 12 Nil
25 Mallet hard wood 0.50 kg. 04 06 12 Nil
26 Hammer Exeter type 0.40 kg. 08 06 24 Nil
27 Hacksaw frame 200mm, 300mm adjustable. 04 (2 each) 06 12

( each)

 Nil
28 Square try 150mm blade 04 06 12 Nil
29 Divider 150mm, outside & inside caliper. 02 each 06 06 each Nil
30 Plier flat nose 100mm. 04 06 12 Nil
31 Plier gas round nose 100mm. 04 06 12 Nil
32 Plier Gas 150mm. 04 06 12 Nil
33 Tweezers 100mm. 04 06 12 Nil
34 Snip straight 150mm. 02 06 06 Nil
35 Snip bent 150mm. 02 06 06 Nil
36 Spanner D.E. metric standard set. 02 06 06 Nil
37 Drill hand brace 0 to 100mm. 04 06 12 Nil
38 Drill S.S. Twist block 2mm, 5mm, 6mm set of 3. 04 06 12 Nil
39 Plane, smoothing cutters, 50mm 04 06 12 Nil
40 Gauge, wire imperial. 02 06 06 Nil
41 File flat 200mm 2nd cut 08 06 24 Nil
42 File half round 200mm 2nd cut. 04 06 12 Nil
43 File round 200mm 2nd cut. 04 06 12 Nil
44 File flat 150mm rough. 04 06 12 Nil
45 File flat 250mm bastard 04 06 12 Nil
46 File flat 250mm smooth 04 06 12 Nil
47 Rasp, half round 200 mm bastard. 04 06 12 Nil
48 Iron, soldering 25 watt, 65 watt, 125 watt. 04 each 06 12 each Nil
49 Copper bit soldering iron 0.25 kg. 04 06 12 Nil
50 De-soldering gun 04 06 12 Nil
51 Vice hand 50mm. Jaw. 04 06 12 Nil
52 Vice Table jaw 100 mm 08 06 24 Nil
53 Vice Hand 50 mm jaw 04 06 12 Nil
54 Pipe cutter to cut pipes upto 5 cm.dia. 04 06 12 Nil
55 Pipe cutter to cut pipes above 5cm dia 01 06 03 Nil
56 Stock and die set for 20 mm to 50mm G.I. pipe. 01 set 06 03 set Nil
57 Stock and dies conduit. 01 06 03 Nil
58 Multi meter 0 to 1000 M Ohms, 2.5 to 500 volt. 06 06 18 Nil
59 Digital Multi meter (3 ½ digits) 02 06 06 Nil
60 A.C. Voltmeter M.I. 0-500 V. A.C. 01 06 03 Nil
61 Milli Voltmeter centre zero 100-0-100 m volt. 01 06 03 Nil
62 D.C. Milli ammeter 0-500ma 01 06 03 Nil
63 D.C. Ammeter MC 0-1 A. 01 06 03 Nil
64 Ammeter M.C. 0-5 A. 01 06 03 Nil
65 Ammeter MC 0-15-25 A. 01 06 03 Nil
66 A.C. Ammeter M.I. 0-5 A. 01 06 03 Nil
67 A.C. Ammeter M.I. 0-15-25 A. 01 06 03 Nil
68 K.W. Meter 0-1-3 Kw 02 06 06 Nil
69 A.C. Energy meter (Single phase 5 Amp. 230V.) 01 06 03 Nil
70 Single phase power factor meter 01 06 03 Nil
71 Frequency meter 01 06 03 Nil
72 Tacho meter with stop watch 02 06 06 Nil
73 Current transformer 02 06 06 Nil
74 Potential transformer 02 06 06 Nil
75 Growler 01 06 03 Nil
76 Tong tester/Clamp meter 0-100 Amp. AC 01 06 03 Nil
77 Megger 500 volts. 01 06 03 Nil
78 Wheat stone bridge complete with galvanometer and

battery

 01 06 03 Nil
79 Relays-Over current, under voltage, etc. 3 volt, 100

amp.

 02 each 06 06 each Nil
80 Contactor 3 phase, 440 volt, 16 amp. 2 NO & 2NC

auxiliary contacts.

 02 06 06 Nil
81 Contactor 3 phase, 440 volt, 32 amp. 2 NO & 2NC

auxiliary contacts.

 02 06 06 Nil
82 Limit Switch 02 06 06 Nil
83 Rotary Switch 16A. 02 06 06 Nil
84 Load bank 5 KW (Lamp/heater type) 02 06 06 Nil
85 Brake test arrangement with two spring balance of 0

to 25 kg. rating.

 02 set 06 06 set Nil
86 Knife switch DPDT fitted with fuse terminals 16

amp.

 12 06 36 Nil
87 Knife switch TPDT fitted with fuse terminals 16

amp.

 12 06 36 Nil
88 DC power supply 0 – 100 volt, 5 amp. 02 06 06 Nil
89 Inverter 1 KVA Input 12 volt DC, Output 220 volt

AC with 12 battery.

 01 06 03 Nil
90 Voltage stabilizer – Input 150-230 volt AC, Output

220 volt AC

 01 06 03 Nil
91 Rheostat 0 – 1 Ohm, 5 Amp., 0 – 10 Ohm,

5 Amp, 0 – 25 Ohm, 1 Amp., 0 – 300 Ohm,

1 Amp.

 02 each 06 06 Nil
92 Domestic appliances: –

(a) Electric hot plate 1500 Watt. 220V. with temperature control

  

02

 06 06  

Nil
(b) Electric kettle, 1000 Watts 230V. 02 06 06 Nil
(c) Electric iron 1200 watts, 220V. with temperature

control.

 02 06 06 Nil
(d) Immersion heater 750/1000/1500 W., 230V. 02 06 06 Nil
(e) Geyser 25 litre 240 V. (Storage type). 01 06 03 Nil
93 Flux meter 02 06 06 Nil
94 Laboratory type induction coil 6 volt to 800-10,000

volt.

 01 06 03 Nil
95 3-Point D.C. starters. 01 06 03 Nil
96 4-point D.C. starters. 01 06 03 Nil
97 Cut out, reverse current, over load voltage relays. 01 each. 06 03 each Nil
98 Starter for 3-phase, 400 V. 50 cycles, 2 to 5 H.P.

A.C. motors :-

(a) Direct on line starter.

  

 

01

 06 03 Nil
(b) Star delta starter with manual, Semi-Auto and

Automatic.

 01 06 03 Nil
(c) Auto transformer type starter. 01 06 03 Nil
99 Electrical machine trainer :-

Suitable for demonstrating the construction and

 01 per

institute

 06 01 per

institute

 Nil
functioning of different types of D.C. machines and

A.C. machines (single phase and three phase). Should  be  complete   with   friction  brake dynamo

meter, instrument panel and power supply units.
100 Motor Generator (AC to DC) consisting of :-

Motor induction squirrel cage, 7 HP 400 volts, 50 cycles, 3-phase with star delta starter and switch directly coupled to DC shunt generator 5 KW 440 volts and switch board mounted with regulator, air circuit breaker, ammeter, voltmeter knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible

coupling.

 01 06 02 Nil
101 Motor Generator (DC to AC) set consisting of :- Motor shunt 5 HP., 440 volts with starting compensator and switch directly coupled to generator AC 3.5 KVA., 400/ 230 volts, 3-phase, 4 wire, 0.8 PF 50 cycles with exciter and 1switch board mounted with regulator, circuit breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. Set complete with cast iron bed plate, fixing bolts, fixing

bolts, foundation bolts, & flexible coupling.

 01 06 02 Nil
102 Used DC Generators-Series, Shunt, and Compound

type for overhauling practice.

 01 each 06 02 each Nil
103 D.C. shunt generator 2.5 K.W. 220V. with control

panel.

 01 06 02 Nil
104 DC compound generator, 2.5 K.W. 250V. with

control panel including filed rheostat, voltmeter, ammeter and circuit breaker.

 01 06 02 Nil
105 Diesel generator 5 KVA, 440 V. AC 3 phase with

change over switch, over current circuit breaker and water-cooled with armature, star-delta connections.

 01 06 02 Nil
106 Motor series D.C., 220 volt, 0.5 to 2 HP. Coupled

with mechanical load.

 01 06 02 Nil
107 Motor shunt D.C., 220 volt,2 to 3 HP. 02 06 04 Nil
108 Motor  DC  compound-would 220 volt,        2 to 3 HP

with starter & switch.

 02 06 02 Nil
109 Motor of AC squirrel cage, 3-phase, 400 volt, 50 cycles, 2 to 3 HP with star delta starter and triple pole iron clad switch fuse. 01 06 02 Nil
110 Motor AC phase-wound slipring type 5 HP 400 volts,

3-phase, 50 cycles with starter and switch.

 01 06 02 Nil
111 Motor AC series type 230 volt, 50 cycles, 1/4 HP

with mechanical load.

 01 06 02 Nil
112 Motor AC single phase, 230 volt. 50 cycles 1 H.P.

capacitor type with starter switch 1 HP.

 01 06 02 Nil
113 Motor universal 230 volt, 50 cycles 1/4 HP with

starter/ switch.

 01 06 02 Nil
114 Stepper motor with digital controller 01 06 02 Nil
115 Fan A.C. 230 volt 1200mm 02 06 04 Nil
116 Transformer single phase, 1 KVA 230/115-50-24-12 volts,50 cycles core type, air Cooled. 03 06 06 Nil
117 Transformer three phase, 5 KVA 440/230 volts, 50

cycles, delta / star, shell type oil cooled.

 02 06 04 Nil
118 Variable auto transformer 0-250V. 8 amps. 02 06 04 Nil
119 Oscilloscope –Dual Trace, 30 MHZ 01 06 02 Nil
120 Function Generator 01 06 02 Nil
121 Discrete component trainer 01 06 02 Nil
122 Linear I.C. Trainer 01 06 02 Nil
123 Digital I.C. Trainer 01 06 02 Nil
124 Bath impregnating 01 06 02 Nil
125 Oven Stoving 02 06 04 Nil
126 Oil testing kit 01 06 02 Nil
127 Battery charger with variable output 1 KW 01 06 02 Nil
128 Hydrometer 01 06 02 Nil
129 A.C.B. 5 KVA 01 06 02 Nil
130 M.C.B. 16 amp. 01 06 02 Nil
131 Thyristor/IGBT controlled D.C. motor drive 1 HP

with tacho-generator feed back arrangement.

 01 06 02 Nil
132 Thyristor/IGBT controlled AC. motor drive VVVF

control, 3 phase, 2 HP.

 01 06 02 Nil
133 Lockers with 2 drawers (standard size) 02 06 12 Nil
134 Bench working 2.5 x 1.20 x 0.75 meter 04 06 12 Nil
135 Almirah 2.5 x 1.20 x 0.5 meter 01 06 03 Nil
136 Instructor’s table 01 06 06 Nil
137 Instructor’s Chair 02 06 06 Nil
138 Fire extinguisher 02 06 04 Nil
139 Fire buckets 04 06 08 Nil
140 Metal rack 100 x 150 x 45 cm 04 06 08 Nil